CONSUMER RATED #1
Docking and Mooring System for ALL Watercraft!

The Stowaway Holdaway™ is a sleek and portable mooring device with a rubber tip to hold your boat or Personal Water Craft (PWC) away from the dock to avoid marring or scuffing the finish. It can conveniently be used on nearly any dock and even to hold two boats together without banging.

• Simple to use
• Small and portable so you can take it with you
• Versatile to tie to any dock or watercraft
• Inexpensive and a quality product
• Five year full replacement guarantee!


The device is designed so that one end is tied somewhere on your boat (usually to the front or back cleat of the boat). The other end is tied to your dock (or whatever you are tying off to). The middle is then tied to another place on the dock. This way, when a Stowaway Holdaway™ is attached to both the front and back of your boat, your boat is held safely away from your dock and cannot float front or back.

The magic of the device is the patented locking system that allows the Stowaway Holdaway™ to adjust to whatever size you need. By simply unscrewing the locking device (only a few screws) you can adjust the Stowaway to the desired length. Then, when you have adjusted it to fit your boat and whatever dock you are temporarily or permanently at, you can tighten the clamp back up.



ORDER NOW at
FACTORY DIRECT PRICES!


Also, for more precision in special circumstances, you could measure the distance you need from the front and back cleats to the dock and reference the table above for the correct combinations of Stowaway's for your boat. For Example:

Two Model SN -- Use this combination for when a boat is up to 23 feet long and has side cleats on both the front and rear. Most fishing boats and pontoons fit this configuration.
Two Model MN -- Use this combination for personal watercraft and for boats with side cleats (up to 23 feet long) that need more space between the boat and the dock. This combination could also be used for small boats with center cleats -- assuming 32 inches is long enough from the dock to the cleat.
Two Model LN -- Use this combination for boats (up to 23 feet) with center cleats in both the front and the rear of the boat.
Two Model XN -- Use this combination for larger boats (up to 60 feet) with side cleats in the front and the rear. This model is extremely strong!
One Model SN and One Model LN -- Use this combination for boats with a center cleat in the front and a side cleat in the back (or visa versa). This combination fits most open bow recreational ski boats and some fishing boats.


SIMPLE TO USE
The Stowaway Holdaway™ is actually a simple concept which makes it extremely easy to use. The device is made of a combination of a patented locking device in the middle, strong PVC pipe, a, nylon rope running through the length of the device through both ends, and a second rope attached to the middle of the device. In addition, the end that ties to the boat is capped with rubber to protect your boat.


PORTABLE SO YOU CAN TAKE IT WITH YOU
As you can see, the device compacts to an extremely small size for easy transport in your boat. You will always be prepared to dock your boat, no matter where you are.


VERSITILE TO TIE TO ANY DOCK OR WATERCRAFT
Whether you have a 60 foot yacht, or a 8 foot row boat, you can use the Stowaway Holdaway™. There are four models , the SN, MN, LN, and XN to accommodate boats with side or center cleats (or no cleats for that matter) and up to 60 feet long! You can even use it if you have a dock slip that uses a front tie-off.


INEXPENSIVE AND A QUALITY PRODUCT
The craftsmanship and quality is remarkable. The Stowaway Holdaway™ is made from absolutely corrosion resistant materials. It is light weight, yet strong enough to hold through wind waves, and tides.


FIVE YEAR FULL REPLACEMENT GUARANTEE!
If any Stowaway Holdaway™ becomes unusable due to bending or breaking for up to five years, we will replace it ABSOLUTELY FREE!

 
 
  Phone: 815-498-2016
Fax: 815-498-2016
Email: customerservice@stowawayholdaway.com